Intelligent electromagnetic flowmeter price, intelligent electromagnetic flowmeter is the 20th century 50~60 era with the development of electronic technology and rapid development of new total flow meter.Electromagnetic flowmeter is a kind of instrument which USES the magnetic effect of current and measures the total flow of conductive fluid accurately according to the electromotive force induced by the addition of electromagnetic field.

Intelligent electromagnetic flowmeter price

Intelligent electromagnetic flowmeter price field selection

1. Master the main processing parameters

(1) master the name of the liquid under test

(2) master the large flow rate, common total flow rate and minimum total flow rate of the measured liquid

(3) master the machining process

(4) master the temperature of the medium

(5) master the medium pressure

(6) master the conductivity of the flow measured body

(7) check whether there is any air pressure condition

Installation procedure of intelligent electromagnetic flowmeter price controller on processing pipeline

1. In any case, the plugging tube of intelligent electromagnetic flowmeter must be fully filled with medium, and cannot work normally under the condition of incomplete tube or empty tube.When the medium is not full, the method of developing outlet aspect ratio at the back end of the flowmeter can be used to make the medium full to prevent the vapor in the tube group sticking to the electrode.

2. The inner lining of the flowmeter will be damaged by the vacuum pump in the pipeline, so please pay attention.

3. The positive bearing of the flow shall be * as indicated by the arrow on the flowmeter.

4. The fully intelligent electromagnetic flowmeter can be installed in the straight pipe line program, can also be installed on the level or skew pipe, but the central wiring of the two electrical level is specified in the horizontal situation.

5. For liquid and solid two-phase fluid, vertical installation is selected to make the medium under test flow from top to bottom, which can make the lining of the flowmeter damage symmetry and increase the service life.

6. The flow meter shall have sufficient indoor space around the flange of the pipeline for easy installation and maintenance.

7. If there is vibration in the accurate measurement of pipeline, there should be fixed rubber supports on both sides of the flowmeter.

8. For the accurate measurement of the medium as the main environmental pollution liquid, the installation procedure of the flowmeter itself in the double-circuit power supply pipeline can exhaust and clear the flow without terminating the process operation.

9. Installation procedure for flow timing of ptfe lining, pay attention to even tightening of anchor bolts of connection flange, otherwise easy to crush ptfe lining, use torque wrench.

Porcelain city Shanghai instruments co., LTD., is the world's leading instrument manufacturers, technology has always been the cornerstone of our company to survive, but we always use direct marketing, cancel the agent, so we can keep in close contact with customers, more important is to ensure that after-sales, delivery, price, etc., really do to ensure that the interests of the customer.